Hand Driven Wrap Reel - Model WR 9
This wrap reel incorporates a Trumeter Revolution Counter (Hand Lever reset). The Swift assembly is constructed to be (a) 36" (b)
54" (c) 1 metre as requested. The bobbin Creel also is constructed to accommodate samples of all bobbins, cops or cones etc as supplied
by each individual customer. The normal width of this model is suitable for four bobbin positions, but wider machines can be made to
suit other requirements upon request. eg. to take 7/8 bobbins. All parts are finished in Stove Enamel, and Highly Chromium Plated.
Approximate shipping weights and measurements:
Packing case: 108 x 67x 61cm
Gross Weight : 50 Kg
Nett Weight: 35Kg.
Hand Driven Wrap Reel - Model WR 41
This wrap reel has been designed to satisfy the demand for a more basic type unit. It incorporates a Trumeter 4 figure revolution
trip counter which is reset by hand to zero. The swift assembly is constructed to be (A) 36" or (B) 1 metre (Other circumferences are
available on request). The bobbin creel is made to accommodate free standing bobbins or packages, which may also be free standing on
the floor or table, the yarn creel guides are adjustable through 360° to enable the free passage of yarn without obstruction from the
end of the metal base. The standard machine is built for 4 hanks to be wound simultaneously, there being 4 guides with a reciprocal
yarn spread of approximately 1.75 " with 0.25" spacings between each hank, (5 position facilities can be constructed / supplied at
extra cost), a vertically adjustable tension bar is fitted as shown.
All parts are finished in grey hammer stove enamel and highly chromium / cadmium plated.
Approximate shipping weights and measurements:
Packing case: 75 x 54 x 66 cm
Gross Weight : 40 Kg
Nett Weight: 23 Kg. |
